Schecter C-1 Standard, Black Cherry (BCH)

C-1 Standard, Black Cherry (BCH), Mahogany w/Flamed Maple Body, Standard Tuning, TonePros TOM w/Thru-Body Bridge

C-1 Standard, Black Cherry (BCH), Mahogany w/Flamed Maple Body, Standard Tuning, TonePros TOM w/Thru-Body Bridge

Tuners -
Grover
ROTOMATICS® WITH 18:1 GEAR RATIO (102-18 SERIES) The original Rotomatic® with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination

Finger Board -
Rosewood
The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.

Pickups -
Duncan Designed HB-102b/HB-101n
Bridge: The HB-102 was modeled after Seymour Duncan's USA-made SH-4 JB™ bridge. Like the HB-101s, this pickup also use Alnico 5 magnets, but have a hotter winding spec, based on the world's most popular "hot-rodded" humbucker. The bridge pickup is Trembucker-spaced. Neck: The HB-101 was patterned after the Seymour Duncan SH-1 '59 Model™ humbucker set. It uses an Alnico 5 magnet and winding spec based on the revered 1955 - 1960 P.A.F.

Neck -
3-pc Maple
Made with 3 pieces of maple for extra stability. 3 piece necks can withstand the test of time. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability.